Questo sito non supporta completamente il tuo browser. Ti consigliamo di utilizzare Edge, Chrome, Safari o Firefox.

Beware of fakes! People are reporting they are breaking and are unsafe. #fakesbreak

Current lead times are 1-2 weeks.

Compatibility Guide

SwitchGrades come in 3 models and five (5) configurations or "Types" - each designed to be compatible with a specific range of seatposts. Be sure to select the correct Type (Type 1, Type 2, Type 3, Type 4 or Type 5) from the drop-down list.

IMPORTANT NOTE: The provided table is strictly a fitment and compatibility guide. The model year shown in brackets below only indicates the model year of the particular seatpost that was tested for fitment compatibility. SwitchGrades feature a universal design and may be backward and/or forward compatible, but unless indicated, we cannot guarantee whether a particular seatpost model year is compatible with respect to fit. All compatibility and fit determinations have been observed solely by Aenomaly Constructs. Use of a SwitchGrade may void any warranty a User has with the original part manufacturer. Ultimately it is the User's responsibility to satisfy themselves on whether a seatpost and/or saddle, whether individually, or in combination, will be compatible with a SwitchGrade.

NOTE: If you do not see your fixed or dropper seatpost listed in the table we cannot confirm compatibility. That is not to say your seatpost is not compatible, we just have not investigated compatibility yet. Our definition of "compatible" is limited only to fit and installation on a noted seatpost. Certain combinations of frame seat tube angle, seatpost head design, and desired tilt may work better on one frame vs. another. You may also require a Shim. Please read Notes carefully.

** TILT SCREEN SIDEWAYS IF VIEWING FROM MOBILE DEVICE **

Seatpost Brand (model year verified)

Type

Base Scallop Configuration

Notes

BikeYoke Revive (2020) Type 4 N / A (preset)
BikeYoke Divine (2022) Type 4 N / A (preset)
Bontrager Drop Line (2018) Type 1 Front B / Rear C Not compatible with Line Elite (air)
Brand X Ascend (2019)

Type 1

Front B / Rear C

Similar to TranzX YSP23J

Cannondale Downlow Type 2 Front B / Rear C
Canyon G5 / Iridium (2021) Type 1 Front B / Rear C
Chromag Dolomite Type 1 Front B / Rear C
Contec Vario Drop-A-Gogo Type 2 Front B / Rear C Note: The use of a "Type 2" Shim is highly recommended to increase the range of tilt adjustment, especially if your bike features a slack "actual" seat angle (e.g 73-74 degrees).
Crankbrothers Highline 3 Type 5 Front B / Rear C Note: Installation requires the use of a Shim (included with Type 5 purchase).
Cube RFR "Inside" Dropper Type 1 Front B / Rear C Internally routed dropper post found on many Cube bikes.
Cube RFR "Outside" Dropper Type 1 Front B / Rear C Externally routed dropper post found on many Cube bikes.
eThirteen Vario (2020) Type 2 Front B / Rear C
Foundation Dropper Type 5 Front B / Rear C
Fox Transfer V1 (2016-2019) Type 1 Front B / Rear C Note: the "T" shaped posthead may limit the range of tilt adjustment especially in cases where a rider has a bike with a slack actual seat tube angle (eg. 65-73 degrees). Riders may want to consider custom shims to increase the range of tilt adjustment.
Fox Transfer V2 (2020-2024) Type 3 Front A / Rear C Requires use of custom barrel nuts, supplied with Type 3 orders
Fox Transfer V3 (2025) New! Type 7 N / A (preset)

 

Note: The 2025 Fox Transfer requires the use of the included Adapter

Fox Transfer Neo Wireless New! Type 7 N / A (preset)

Note: The 2025 Fox Transfer requires the use of the included Adapter

Fox Transfer SL Type 1 Front B / Rear C Note: the "T" shaped posthead may limit the range of tilt adjustment especially in cases where a rider has a bike with a slack actual seat tube angle (eg. 65-73 degrees). Riders may want to consider custom shims to increase the range of tilt adjustment.
Full Speed Ahead (FSA) Flowtron Type 5 Front B / Rear C FSA Flowtron installation requires the use of a Shim (included with Type 5 configuration).
Giant Contact Switch (2021) Type 5 Front B / Rear C Giant Contact Switch installation requires the use of a Shim (included with Type 5 configuration).
Giant Contact S Switch (2021) Type 5 Front B / Rear C Giant Contact S Switch installation requires the use of a Shim (included with Type 5 configuration).
Intense Recon Dropper Type 2 Front B / Rear C
KS EXA Form 900i Type 2 Front B / Rear C
KS Lev Integra (2020)  Type 2 Front B / Rear C Note: Only compatible with 2020 and newer KS Lev Integra models.
KS Rage (2021) Type 2 Front B / Rear C
Limotec A1 Type 1 Front B / Rear C
Lyne Contour Dropper Type 1 Front B / Rear C
Manitou Jack (2022) Type 4 N / A (preset)
Merida Expert TR Type 1 Front B / Rear C
OneUp Components V1 & V2  Type 1 Front B / Rear C Requires use of vinyl end cap, supplied with all orders. May require installation of rubber limiters for air valve, included with purchase.
OneUp Components V3 (2024)  See Notes. Type 1 Front B / Rear C IMPORTANT NOTE! We have received some reports that OneUp V3 posthead may vary in depth and may require the use of an optional Type 1 Shim (purchased separately) in order to add more tilt range and remove chance of interference with front lip of posthead. If your posthead concave is greater/deeper than 5.6mm then you may need a Shim. 
OnOff Pija  Type 1 Front B / Rear C
Orbea OC2 (2021) Type 2 Front B / Rear C Note: Similar to SDG Tellis. While not required, the use of a "Type 2" Shim is recommended to increase the range of tilt adjustment IF your bike features a slack "actual" seat angle (e.g 73-74 degrees)
Orbea MC20 (2022) Type 2 Front B / Rear C Note: Similar to SDG Tellis. While not required, the use of a "Type 2" Shim is recommended to increase the range of tilt adjustment IF your bike features a slack "actual" seat angle (e.g 73-74 degrees)
PNW Loam (2020) Type 1 Front B / Rear C

Requires use of vinyl end cap, supplied with all orders. May require installation of rubber limiters for air valve, included with purchase.

Similar to TranzX YSPI08A.

PNW Coast (2021) Type 1 Front B / Rear C Similar to TranzX YSP30
PNW Pine Type 1 Front B / Rear C
Poste Moderne Type 2 Front B / Rear C
Raceface Aeffect R (2019) Type 1 Front B / Rear C
Raceface Chester Type 1 Front B / Rear C
Raceface NEXT SL Carbon Type 1 Front B / Rear C IMPORTANT! You may need to purchase a Shim (sold separately) if your actual seat tube angle is slacker than 76 degrees.
Raceface Turbine R (2021) Type 3 Front A / Rear C Requires custom barrel nuts, supplied with Type 3 orders
Raceface Turbine R (2019) Type 1 Front B / Rear C Similar to Fox Transfer (2019)
Rockshox Reverb Stealth (2019) Type 2 Front B / Rear C
Rocky Mountain Toonie Drop (2021) Type 2 Front B / Rear C
RST Elev 8 H Type 2 Front B / Rear C
Satori Sorata Pro (2021) Type 5 Front B / Rear C
Scada Relevo (2020) Type 1 Front A / Rear D
SDG Tellis V1 Type 2 Front B / Rear C Note: While not required, the use of a "Type 2" Shim is highly recommended to increase the range of tilt adjustment, especially if your bike features a slack "actual" seat angle (e.g 73-74 degrees)
Switch Components Type 1 Front B / Rear C Note: compatible across Switch models SW, SWR lines except for wireless and cordless models.
Syncros Duncan  Type 1 Front B / Rear C Similar to TranzX
Thomson Elite New!  Type 6 Front B / Rear C

Note: The Thomson seatposts will require the "Wide Body Shim"

Thomson Masterpiece New! Type 6 Front B / Rear C

Note: The Thomson seatposts will require the "Wide Body Shim"

Thomson Titanium New! Type 6 Front B / Rear C

Note: The Thomson seatposts will require the "Wide Body Shim"

TranzX YS105 (2021) Type 1 Front B / Rear C
TranzX YSI08A (2021) Type 1 Front B / Rear C
TranzX YSP18 (2021) Type 1 Front B / Rear C
TranzX YSP23J (2021) Type 1 Front B / Rear C
TranzX YSP30 (2021) Type 1 Front B / Rear C
X Fusion Manic (2021)

Type 2 or

Type 5

 

SEE NOTES!

Front B / Rear C

Note: Customers with an X-Fusion Manic may or may not need to use a Shim. The Type 2 SwitchGrade is identical to the Type 5 except the latter comes standard with a Shim.

 

Guideline:

 

OPTION 1: Select Type 2 if your bike's "Actual Seat Tube Angle" is greater than 76 degrees.

 

OPTION 2: Select Type 5 if your bike's "Actual Seat Tube Angle" is 76 degrees or slacker.

 

If you are unsure, the safest route is to select Type 5.

XLC SP-T10 Type 1 Front B / Rear C
XLC SP-T13B Type 1 Front B / Rear C
YEP Uptimizer 3.0 Type 1 Front B / Rear C
YT Postman Version 1 (2021) Type 2 Front B / Rear C

Note: Similar to SDG Tellis. Use of a "Type 2" Shim is recommended to increase the range of tilt adjustment, especially if your bike features a slack actual seat angle (e.g 73-74 degrees)

Note: not compatible with Version 2 Postman released April 2024.

Zipp Service Course Type 1 Front B / Rear C

 

Compatibility subject to change.

SwitchGrades are not currently compatible with:

  • 9Point8 Fall Line
  • Bontrager Line Elite (air)
  • Crank Brothers Highline 7
  • Fox Transfer Version 3.0 (MY2025) 
  • KS Lev Integra (pre-2020 models)
  • RockShox AXS
  • SDG Tellis Version 2.0 (2024)
  • Shimano Koryak
  • Wolf Tooth Resolve
  • Vecnum Nivo
  • YT Postman Version 2.0 (2024)